Press Feeding System

These systems, which are produced in large sizes by specialized companies in their field, come to you as a machine. For the press feeding system, the most important and sensitive parts of the manufacturing sector such as production lines, machinery technical support systems are worked on and all of these are produced in the highest quality according to the necessary engineering criteria.   

• The Press Feeding System is called the whole system that will feed the press, which is formed by roll openers and drives, which brings the flat sheet to the desired form.
• These systems machines have a wide range of products in systems. It offers a long service life in systems. The produtcts are easy to aseemble and quite easy to use.
• Machines of this type are mainly divided into two main groups in terms of press types and characteristics. Although they are decoupled into groups among themselves, presses are actually named in two main groups.
• These are eccentric presses, another name is mechanical presses, and hydraulic presses. The principles of operation and the mechanisms that ensure the operation of the system differ.
• There are many options in terms of types and features of press machines.

What are the Types of the Press Feeding System?

There are several types depending on the body structure of press feeding system. There are terms suchs as open-body presses and flat-edge presses. Presses are divided into two according to the body type. Type H presses and type C presses. The bodies are also located in hydraulic presses and eccentrix presses. Again, the choice can be made according to the need. Press feeding system are machines that convert the rotational motion received from an electric motor into mechanical energy and use this energy. Presses also are divided into two classes according to the their drive systems:

1. Mechanical Presses
2. Hydraulic Presses

For mechanical press feeding system:

• The rotational motion obtained by the electric motor is transferred to the flywheel by means of belts.
• This is due to the high number of revolutions of the electric motor.
• That is why the number of revolutions of the engine is transferred by lowering it on the transmission.
• There is a clutch and brake group on the shaft, which is connected to the press flywheel.
• The press clutch and brake group are operated by pneumatic or hydraulic control.

According to the their functions, these systems are divided into three groups. They are known as Single-Action Press, Double-Action Press, and Three-Action Press.

What are the Features of Press Feeding System?

Straightening and feeding operations can be combined into one machine for the production of many sheet metals. A good press feeding system is needed to get the most out of the stamping line. A great press feeding system should meet the following basic and vital aspects:

• Flexibility: the feed adjustment must be flexible for all uses to be made on the machine.
• Setup: In order for the material to be fully fed into the machine, it is very important to properly install the system.
• Pacing: The feeding system must deliver the material at the right speed in order to keep up with the pace of the process.

These system machines have made much more progress in the last decade. Machines that are increasingly being used also allow faster and better quality printing of products. Stampers also benefit users in terms of faster speed, better flexibility, higher quality, and reliability, and in terms of mant other actions.

 

---

---